B130 4G/5G PTZ Deploy Camera
operate | install user manual
Special Declaration
Before connecting and using this product, please read these instructions carefully and keep it for references in the future.
This manual might be not accurate technically or contains some minor type errors. The contents in this manual about production description and program might be updated without notice. updated contents will be added in the new version. We will change or upgrade the products or program any time.
Caution
careful Transport
During transport, custody and install process should prevent weight, severe vibration and soak damage to product.Power Supply、signal cable and control cable For power supply cable, video cable and control cable, please adopt shielded cable an independent wiring, can not mix with other cables.
Tightly sealed
Prevent liquid splashing or foreignobjects falling into the ball machine,otherwise it will cause permanent damage to the equipment.
Please do not use camera beyond limited temperature and humidity Speed dome camera working temperature : -20℃ to 60℃, humidity less than 90%. Prohibition(attention) Toward camera to strong light source for a long time will damage the color filter on CCD or CMOS, then it willmake image lose color.Do Not Disassemble Zoom Camera In order to well match night vision, we sell IR speed dome camera with zoom camera, please not disassemble zoom camera if there is no technical person.
Electric Safety
It Should obey all kinds of electric standard when using speed dome camera, make sure signal cable keep enough distance(at least 50m)with high voltage equipment or cables. If it is possible, please take lightning and surge measurement.Do not install the camera near the air outlet of the air conditioner In the following cases, the lens will fog due to condensation: Rapid temperature changes caused by the air conditioner when it is turned on and off; Can make glasses use in a foggy environment;Use in an environment full of smoke or dust.
Clean
When clean camera housing, please use dry soft cloth to wipe, If it is too dirty, please use neutral cleaner to wipe lightly. Do not use strong or grind cleaner to prevent its housing from scratching.
chapter 1: Product interview
1.1 Product brief introduction
It is a portable wireless video emergency command integrated product integrating local storage, wireless transmission, and built-in power supply. It provides users with high-definition, smooth and stable video image effects remotely, and can realize positioning, emergency, and video , PTZ control, zoom control and other operations, two-way voice intercom and other functions. It is a complete set of emergency command equipment for emergencies. It provides technical support for the realization of "unblocked communication, timely on-site, complete data, and in place command" of emergency command.
It can be widely used in emergency command, public security, criminal investigation, traffic patrol, and fire fighting. , Civil defense emergency, border defense, urban management, electric power,railway, road administration and other fields.
1.2 Product features
HD video, 2mp high resolution 1920x 1080p；
Integrated structure design, protection level up to IP67；
Small size and lightweight design, the weight of a single ptz camera no exceed 2.64KG；
360 degree continuous rotation, support patrol, line scan, preset position, park position, etc；
23x optical zoom, Max up to 80m infrared night vision distance；
Support 3D positioning function, which can accurately locate and monitor the selected screen； Support 4G full Netcom remote wireless video transmission, real-time smooth image；
Support mobile phones and tablets to access the camera via the client；
Support two-way voice intercom, Built-in high-sensitivity pickup, optional hand microphone； Support TF card storage, max up to 256G；
Magnetic composite suction cup design, built-in large-capacity lithium battery;
Optional AI function, face capture recognition, human type detection, structuring of vehicle license plate video, helmet recognition, etc;
1.3 Scope of Application
It can be widely used in emergency command, public security, criminal investigation, traffic patrol, and fire fighting. , Civil defense emergency, border defense, urban management, electric power, railway, road administration and other fields.
1.4 Technical parameter
Camera
sensor:1/2.8"High performance low illumination CMOS sensor ( IMX327 )
Resolution:1080P (1920*1080 25/30 frames/sec)
Optical zoom: 23X
Focus lens: F = 4.7~108mm
Iris: F1.6~F3.8
View angle: Wide:65.2°×56.9°Tele:3.3°×2.9°
Illumination:（condition：F1.6（W）,50 IRE），0.05 lx（1/30s）IR-CUT on， 0.005 lx（1/4s）IR-CUT off
WDR:WDR
Day-night mode: ICR cut switch
focusing type: Auto focusing/one-time focus/manual focus
Optical zoom: 23X
other: Fog imaging，day and night infrared correction 400-1100nm，camera preset
protocol:ONVIF,GB28181
PTZ
Pan rotation speed:Control speed 100°/s
Tilt rotation speed:Control speed 60°/s
Pan range:360° continuous rotation
Tilt range:-30°-90
Fix way:Magnetic composite suction cup
Communication control:Rs-485/422，Pelco P、D，2400、4800、9600 optional
Keyboard control:support joystick keyboard control
preset:255x
Patrol:4x
physical characteristics
Satellite positioning:GPS/beidou（built-in module）
LCD Display:Support OLED screen to display 4G, WIFI, GPS connection status, storage status, signal strength, and display platform connection status
3G/4G:Built-in，4G full Netcom
WIFI:Built-，support hot AP,15meter communication distance
storage:Single card, max to 256G
Audio input:Built-in high-sensitivity pickup, optional hand microphone
Use environment:outdoor
Fix way:Magnetic composite suction cup，tripod install
Battery capacity:120Wh（9 18650 batteries）
Charging time:Turn off for 4 hours, turn on for 8 hours (typical 12V 3A)
power:DC12.6V Iin≥5A
power:consumption Common 10W, maximum power consumption is less than 20W (turn onIR)
Working humidity:0~95% No condensation
waterproof:IP67
weight:2.64kg/5kgwith safe box package
size MM:Φ139.1*229mm
