INFRARED THERMAL CAMERA
The advanced non-contact long-distance human body temperature measurement system, front-end dual spectrum vanadium oxide high-precision temperature detection sensing probe, ± 0.1C high-precision temperature sensing; detection distance up to 5M; multi-target detection at the same time, up to five people can pass at the same time; regional alarm, can be set up with multiple control areas, network control, multi-channel simultaneous monitoring
* Dual spectrum temperature camera supports 1-5m distance temperature measurement, 7 * 24h continuous operation, and always on-line monitoring, temperature measurement and early warning of the target. * For each area detected by the dual spectrum temperature measurement camera, the single screen image can be divided into 32 different detection areas (multi-channel simultaneous screening and temperature measurement). Each area can be named separately. The highest temperature, lowest temperature and average temperature of each area can be displayed on the same screen, and the alarm threshold value of each area can be defined separately. * Timely target monitoring, temperature display, over temperature alarm, dual spectrum temperature camera with built-in intelligent chip and algorithm, high equipment reliability. * The data monitored by the dual spectrum temperature measurement camera is basically consistent with the data measured by the hand-held gun, and AI intelligent operation is adopted. Due to different monitoring distance and different ambient temperature, the temperature measurement data can be compensated or corrected in real time. * The dual spectrum temperature camera is fully hardware designed, with high integration, stable and reliable performance, complete functions, small system power consumption, environmental protection and easy to use, simple system deployment, similar to the work of general monitoring camera. * The dual spectrum temperature camera supports the standard protocols such as ONVIF and GB28181, and can be easily accessed to the traditional security system. It has strong compatibility, ease to use and expandable, and can work together with multiple systems.
SPECIFICATION | Infrared Sensor
| Resolution | visible light 1920*1080 | Infrared thermography 640*480 | Sensor Type | Uncooled vanadium oxide focal plane array | Pixel spacing | 12μm | Waveband | 7.5～ 13.5μm | Input Voltage | 4.4V～6V DC | Power | < 1.2 W | Noise equivalent temperature difference | < 50mK @ 25℃，F#1.0 | Startup time | < 3.5sec | FFC duration | <0.5 sec | Infrared Camera | Focal Length | 9mm | 13mm | 19mm | Zooming | fixed | fixed | fixed | Aperture | 1.25(336)/1.4(640) | 1.25 | 1.25 | Field Angle | 640*512 | 69°×56° | 45°×37° | 32°×26° |
| 384*280 | 37°×25° | 25°×19° | 17°×13° | Image | Digital Video | Parallel Channel:COMS(8/14 bit),BT656(8bit) | Amplification | ×2, ×4, ×8 | Image Enhancement | Automatic gain control，Digital data enhancement | Image control | Continuous digital zoom, Dynamic zoom & Rotary zoom , Image optimization | Brightness contrast | Auto / manual | Polar pseudo color | 14 Polar pseudo colors | OSD | Multi zone OSD: date and time setting，scene name and customized OSD（8 lines,with multi characters in each line ） | Image correction | Auto / manual | Temperature measurement | Range | High gain : -40℃～150℃；Low gain: -40℃～550℃ | Correction | Auto / manual | Modes | Full frame rate temperature record, maximum and minimum temperature capture, over temperature, low temperature alarm, abnormal temperature rise and differential, temperature alarm |
| The thermal imaging video image supports the temperature measurement rules of points, lines and areas, with a maximum of 16 points, 16 areas and 16 lines, and supports the temperature field curve recording and display |
| It supports the function of historical temperature query. It can query the historical temperature records of any point, line and area in the thermal imaging screen through the client software, and display them in the form of mutation |
| Support thermal imaging video area intrusion detection, cross-border detection, entry area detection and exit area detection functions | Emissivity correction | 0.01 to 1.0 Emissivity can be set，or according to a predefined Emissivity table | Background temperature correction | Auto | Atmospheric transmittance correction | According to the input ambient temperature, distance and relative humidity | Temperature abnormal alarm | On/Off | Video Coding | Hardware characteristics | High stability, stable operation no less than 7 * 24 hours |
| With Ethernet interface, supporting TCP / IP, SIP \ RTSP \ RTP \ RTCP and other network protocols |
| 1 channel audio input / output interface | Video /Audio Compression Format | H.265 / H.264 / MJPEG |
| Multi Resolution ，336*256、640*512、720*576、1280*1024 |
| G.711u Audio code algorithm, supporting mute function |
| Support adjustable video coding parameters, resolution, code rate, frame rate, frame type and other parameters, support adjustment of video brightness, contrast, chroma, saturation and other parameters | Live | All video channels support OSD |
| Support real-time streaming mode, support UDP / TCP configurable | device management | Support local upgrade, remote upgrade, batch upgrade, and upgrade plan management |
| Support centralized management of business and configuration of front-end equipment by central server | Visible Light Camera
| Sensor | 1/2.8 inch Progressive pixel CMOS | | Visible Light Camera | Maximum Resolution | Full HD/1080P(1920x1080) | Focal Length | 8/12mm | Aperture | F1.4 | Minimum Illumination | 0.002Lux (F1.2,AGC ON, color) | Shutter | 1/6～1/8000s | Wide dynamic range | 120dB | Day to night conversion | Automatic day night infrared filter switching | Video Compression Format | H.264 BP/MP/HP，H.265 main profile ,MJPEG | Audio Compression Format | G.711 / AAC / MP2 | Horizontal resolution | >1000TVL | Video rate | 32Kpbs～8Mpbs，Output multi-channel video stream frame rate and bandwidth at full frame rate at all resolutions，supporting VBR/CBR | Exposure control | Automatic, manual, priority (shutter or max AGC), brightness, etc | Exposure mode | Auto, center exposure, global average exposure, manually specify area | Exposure compensation | 5 grades | white balance | Auto, scene (incandescent, fluorescent, daylight, flash, etc.), manual | Gain | Automatic, threshold control | Backlight compensation | Off / On | Strong light suppression | Off / On | Image effects | Rotation and mirroring, longitude and latitude image mode, custom image mode | noise reduction | 3D-MCTF Digital noise reduction | Day and night mode | Auto / color / black and white | OSD | Multi zone OSD: date and time setting，scene name and customized OSD（5 lines,with multi characters in each line ），Support thermal image alarm temperature superposition | Intelligent alarm | Mobile detection, area intrusion detection | communication interface | RS485/RS-422 | Communication protocol | IPv4, TCP/IP, UDP, HTTP, DHCP, RTP/RTCP/RTSP, FTP, DDNS, NTP | Networks and interfaces | network interface | RJ45 100M Adaptive Ethernet Port | Protocol | IPv4, TCP/IP, UDP, HTTP, DHCP,RTP/RTCP/RTSP, FTP, DDNS, NTP | Compatibility protocol | ONVIF, GB/T 28181 | Safety | Password protection, multi-user access control | Web Service | Built in web access page | Environmental parameters | working temperature | -40℃～ +85℃ | Storage temperature | -55℃ ～ +95℃ | Temperature shock | 5℃/min | Working humidity | 5% ～95%，non-condensing | Impact | Half sine wave, acceleration 30g, pulse width 6ms, impact in installation and using direction 3 times | Vibration | 10HZ～40HZ，0.015g^2⁄HZ；40HZ～500HZ， 0.00015g^2⁄HZ, Rms:1.04291g，5min，X,Y,Z axis | Protection level | IP66 | System parameter
| Network output | Infrared and visible light share one IP for easy access | working voltage | DC12V | Power | ＜6W | Electrostatic immunity | The immunity of electrostatic discharge shall meet the requirements of grade 3 in GB/ T 17626.2-2006, with air discharge of 15kV and contact discharge of 9KV | Maintainability | With one key recovery function |
| Support remote upgrade |
| Equipped with operation status indicator light, network port indicator light, reflecting the operation status of the equipment in time |
|
